And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.419
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.304
And
I accept adding "cowsay" to Additional Software
7.279
And
Additional Software is correctly configured for package "cowsay"
1.005
And
I shutdown Tails and wait for the computer to power off
6.491
And
I start Tails from USB drive "__internal" with network unplugged
1:7.734
And
I enable persistence
10.505
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
37.146
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.038
And
all notifications have disappeared
6.637
And
available upgrades have been checked
1.179
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.133
And
I can open the Additional Software configuration window from the notification
3.531
And
I shutdown Tails and wait for the computer to power off
17.955
And
I start Tails from USB drive "__internal" with network unplugged
59.032
And
I enable persistence
11.373
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
37.490
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.069
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.199
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093