And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.801
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.598
And
I accept adding "cowsay" to Additional Software
6.919
And
Additional Software is correctly configured for package "cowsay"
0.829
And
I shutdown Tails and wait for the computer to power off
6.495
And
I start Tails from USB drive "__internal" with network unplugged
59.101
And
I enable persistence
10.194
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.485
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.012
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.046
And
all notifications have disappeared
6.289
And
available upgrades have been checked
0.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.568
And
I can open the Additional Software configuration window from the notification
3.538
And
I shutdown Tails and wait for the computer to power off
2:2.849
And
I start Tails from USB drive "__internal" with network unplugged
1:5.577
And
I enable persistence
8.850
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
37.290
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.508
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.173
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085