And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.373
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.417
And
I accept adding "cowsay" to Additional Software
7.946
And
Additional Software is correctly configured for package "cowsay"
1.190
And
I shutdown Tails and wait for the computer to power off
9.553
And
I start Tails from USB drive "__internal" with network unplugged
1:9.991
And
I enable persistence
14.633
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
42.465
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
40.802
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.113
And
all notifications have disappeared
8.581
And
available upgrades have been checked
0.110
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.149
And
I can open the Additional Software configuration window from the notification
4.229
And
I shutdown Tails and wait for the computer to power off
9.445
And
I start Tails from USB drive "__internal" with network unplugged
1:2.652
And
I enable persistence
18.764
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
36.441
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.006
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.079
And
the network is plugged
0.172
Then
the Additional Software upgrade service has started
0.160
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.114