Cucumber Reports (no 3379) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3379	08 May 2024, 12:56

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:37.484	Passed

Tags: @product @not_release_blocker

28.675

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 10.667

And I temporarily create a 4 GiB disk named "gptfat" 0.050

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.324

And I plug USB drive "gptfat" 2.483

When I start Tails Installer 9.084

Then I am told by Tails Installer that the destination device "is too small" 0.063

Hooks

After features/support/hooks.rb:305 0.743

After features/support/hooks.rb:89 0.001

Tags: @product

20.273

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.504

And I temporarily create a 7200 MiB disk named "temp" 0.048

And I start Tails Installer 8.833

But a suitable USB device is not found 0.020

When I plug USB drive "temp" 2.526

Then the "temp" USB drive is selected 0.096

When I unplug USB drive "temp" 0.199

Then a suitable USB device is not found 0.042

Hooks

After features/support/hooks.rb:305 0.781

After features/support/hooks.rb:89 0.000

Tags: @product

3:56.630

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 11.013

And I temporarily create a 7200 MiB disk named "install" 0.060

And I create a gpt partition with a vfat filesystem on disk "install" 6.403

And I plug USB drive "install" 2.479

And I install Tails to USB drive "install" by cloning 3:23.066

Then the running Tails is installed on USB drive "install" 13.541

But there is no persistence partition on USB drive "install" 0.065

Hooks

After features/support/hooks.rb:305 1.224

After features/support/hooks.rb:89 0.116

Tags: @product

4:12.458

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.806

And I temporarily create a 7200 MiB disk named "install" 0.171

And I plug USB drive "install" 3.291

And I install Tails to USB drive "install" by cloning 3:46.818

Then the running Tails is installed on USB drive "install" 13.292

But there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:305 1.225

After features/support/hooks.rb:89 0.121

Tags: @product

4:31.034

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 17.680

And I create a file in the Persistent directory 0.098

And I temporarily create a 7200 MiB disk named "install" 0.093

And I create a gpt partition with a vfat filesystem on disk "install" 6.566

And I plug USB drive "install" 2.522

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:44.667

Then the running Tails is installed on USB drive "install" 15.841

And there is a persistence partition on USB drive "install" 0.074

And the USB drive "install" contains the same files as my persistent storage 3.488

Hooks

After features/support/hooks.rb:305 1.972

After features/support/hooks.rb:89 0.120

Tags: @product

3:53.239

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.681

And I temporarily create a 7200 MiB disk named "install" 0.041

And I plug USB drive "install" 2.497

And I install Tails to USB drive "install" by cloning 3:20.004

Then the running Tails is installed on USB drive "install" 18.932

And there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:305 2.036

After features/support/hooks.rb:89 0.108

Tags: @product

3:54.292

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.980

And I have started Tails from DVD without network and logged in 8.907

And I clone USB drive "__internal" to a temporary USB drive "install" 1.546

And I plug USB drive "install" 2.579

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:17.846

Then the running Tails is installed on USB drive "install" 13.363

And there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:305 1.057

After features/support/hooks.rb:89 0.126

Tags: @product @uefi

2:5.098

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 14.030

And I power off the computer 0.337

And the computer is set to boot in UEFI mode 0.026

When I start Tails from USB drive "__internal" with network unplugged and I login 1:47.039

Then Tails is running from USB drive "__internal" 0.347

And the boot device has safe access rights 3.269

And Tails has started in UEFI mode 0.045

Hooks

After features/support/hooks.rb:305 0.652

After features/support/hooks.rb:89 0.006

Tags: @product

1:45.804

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.621

And I plug and mount a USB drive containing a Tails USB image 41.851

And I create a 7200 MiB disk named "usbimage" 0.041

And I plug USB drive "usbimage" 2.429

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 52.860

Hooks

After features/support/hooks.rb:305 4.009

After features/support/hooks.rb:89 0.101

Tags: @product

1:29.978

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given a computer 0.180

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:28.636

Then Tails is running from USB drive "usbimage" 0.327

And the label of the system partition on "usbimage" is "Tails" 0.248

And the system partition on "usbimage" is an EFI system partition 0.146

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.139

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.084

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.135

And the system partition on "usbimage" has the expected flags 0.079

Hooks

After features/support/hooks.rb:305 0.674

After features/support/hooks.rb:89 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:37.484	Passed

Feature Report