Cucumber Reports (no 3377) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_devel	3377	06 May 2024, 16:48

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:13.182	Passed

Tags: @product @not_release_blocker

28.220

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 10.579

And I temporarily create a 4 GiB disk named "gptfat" 0.063

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.336

And I plug USB drive "gptfat" 2.626

When I start Tails Installer 8.561

Then I am told by Tails Installer that the destination device "is too small" 0.051

Hooks

After features/support/hooks.rb:305 1.905

After features/support/hooks.rb:89 0.002

Tags: @product

22.876

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 9.638

And I temporarily create a 7200 MiB disk named "temp" 0.068

And I start Tails Installer 10.094

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.678

Then the "temp" USB drive is selected 0.124

When I unplug USB drive "temp" 0.220

Then a suitable USB device is not found 0.028

Hooks

After features/support/hooks.rb:305 1.127

After features/support/hooks.rb:89 0.000

Tags: @product

3:52.380

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given I have started Tails from DVD without network and logged in 9.194

And I temporarily create a 7200 MiB disk named "install" 0.088

And I create a gpt partition with a vfat filesystem on disk "install" 6.505

And I plug USB drive "install" 2.544

And I install Tails to USB drive "install" by cloning 3:19.790

Then the running Tails is installed on USB drive "install" 14.169

But there is no persistence partition on USB drive "install" 0.087

Hooks

After features/support/hooks.rb:305 1.250

After features/support/hooks.rb:89 0.115

Tags: @product

3:44.763

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.963

And I temporarily create a 7200 MiB disk named "install" 0.051

And I plug USB drive "install" 2.599

And I install Tails to USB drive "install" by cloning 3:19.958

Then the running Tails is installed on USB drive "install" 13.110

But there is no persistence partition on USB drive "install" 0.079

Hooks

After features/support/hooks.rb:305 1.078

After features/support/hooks.rb:89 0.134

Tags: @product

4:31.276

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.005

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 15.501

And I create a file in the Persistent directory 1.120

And I temporarily create a 7200 MiB disk named "install" 0.064

And I create a gpt partition with a vfat filesystem on disk "install" 6.413

And I plug USB drive "install" 2.598

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:42.391

Then the running Tails is installed on USB drive "install" 16.269

And there is a persistence partition on USB drive "install" 0.074

And the USB drive "install" contains the same files as my persistent storage 6.841

Hooks

After features/support/hooks.rb:305 2.187

After features/support/hooks.rb:89 0.121

Tags: @product

3:50.765

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 11.181

And I temporarily create a 7200 MiB disk named "install" 0.045

And I plug USB drive "install" 2.619

And I install Tails to USB drive "install" by cloning 3:20.029

Then the running Tails is installed on USB drive "install" 16.806

And there is no persistence partition on USB drive "install" 0.082

Hooks

After features/support/hooks.rb:305 1.744

After features/support/hooks.rb:89 0.093

Tags: @product

4:0.863

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.480

And I have started Tails from DVD without network and logged in 10.257

And I clone USB drive "__internal" to a temporary USB drive "install" 1.219

And I plug USB drive "install" 4.238

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:17.632

Then the running Tails is installed on USB drive "install" 17.906

And there is no persistence partition on USB drive "install" 0.128

Hooks

After features/support/hooks.rb:305 1.924

After features/support/hooks.rb:89 0.139

Tags: @product @uefi

2:3.777

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 15.425

And I power off the computer 0.333

And the computer is set to boot in UEFI mode 0.028

When I start Tails from USB drive "__internal" with network unplugged and I login 1:44.543

Then Tails is running from USB drive "__internal" 0.383

And the boot device has safe access rights 3.013

And Tails has started in UEFI mode 0.047

Hooks

After features/support/hooks.rb:305 1.309

After features/support/hooks.rb:89 0.005

Tags: @product

1:43.052

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.100

And I plug and mount a USB drive containing a Tails USB image 41.070

And I create a 7200 MiB disk named "usbimage" 0.048

And I plug USB drive "usbimage" 2.385

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 51.448

Hooks

After features/support/hooks.rb:305 2.005

After features/support/hooks.rb:89 0.090

Tags: @product

1:35.208

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.202

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:33.884

Then Tails is running from USB drive "usbimage" 0.313

And the label of the system partition on "usbimage" is "Tails" 0.276

And the system partition on "usbimage" is an EFI system partition 0.135

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.141

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.081

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.079

And the system partition on "usbimage" has the expected flags 0.094

Hooks

After features/support/hooks.rb:305 1.017

After features/support/hooks.rb:89 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	26:13.182	Passed

Feature Report