And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.533
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.715
And
I accept adding "cowsay" to Additional Software
3.662
And
Additional Software is correctly configured for package "cowsay"
0.763
And
I shutdown Tails and wait for the computer to power off
4.179
And
I start Tails from USB drive "__internal" with network unplugged
38.804
And
I enable persistence
6.727
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
10.511
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.015
And
available upgrades have been checked
1.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.514
And
I can open the Additional Software configuration window from the notification
2.581
And
I shutdown Tails and wait for the computer to power off
23.085
And
I start Tails from USB drive "__internal" with network unplugged
37.128
And
I enable persistence
5.396
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.984
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066