And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.424
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.415
And
I accept adding "cowsay" to Additional Software
4.101
And
Additional Software is correctly configured for package "cowsay"
0.495
And
I shutdown Tails and wait for the computer to power off
3.942
And
I start Tails from USB drive "__internal" with network unplugged
32.036
And
I enable persistence
10.634
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
6.770
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.029
And
available upgrades have been checked
0.029
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.819
And
I can open the Additional Software configuration window from the notification
2.425
And
I shutdown Tails and wait for the computer to power off
13.883
And
I start Tails from USB drive "__internal" with network unplugged
32.223
And
I enable persistence
10.330
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.245
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.035
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046