And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.669
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.949
And
I accept adding "cowsay" to Additional Software
4.025
And
Additional Software is correctly configured for package "cowsay"
0.523
And
I shutdown Tails and wait for the computer to power off
2.554
And
I start Tails from USB drive "__internal" with network unplugged
32.525
And
I enable persistence
10.144
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.037
And
I log in to a new session
6.671
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.155
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.019
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.034
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.339
And
I can open the Additional Software configuration window from the notification
2.393
And
I shutdown Tails and wait for the computer to power off
12.442
And
I start Tails from USB drive "__internal" with network unplugged
32.601
And
I enable persistence
10.547
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.860
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.155
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.041