And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.331
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.351
And
I accept adding "cowsay" to Additional Software
4.155
And
Additional Software is correctly configured for package "cowsay"
0.448
And
I shutdown Tails and wait for the computer to power off
4.019
And
I start Tails from USB drive "__internal" with network unplugged
31.934
And
I enable persistence
11.260
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
6.600
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.151
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.025
And
available upgrades have been checked
1.084
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.305
And
I can open the Additional Software configuration window from the notification
2.624
And
I shutdown Tails and wait for the computer to power off
12.524
And
I start Tails from USB drive "__internal" with network unplugged
32.102
And
I enable persistence
10.669
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.267
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.047