And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.737
And
I configure APT to prefer an old version of cowsay
0.018
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.916
And
I accept adding "cowsay" to Additional Software
4.598
And
Additional Software is correctly configured for package "cowsay"
0.577
And
I shutdown Tails and wait for the computer to power off
3.970
And
I start Tails from USB drive "__internal" with network unplugged
35.596
And
I enable persistence
8.806
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
9.221
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.017
And
available upgrades have been checked
1.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.515
And
I can open the Additional Software configuration window from the notification
2.506
And
I shutdown Tails and wait for the computer to power off
8.037
And
I start Tails from USB drive "__internal" with network unplugged
36.000
And
I enable persistence
9.268
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.592
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059