Project Number Date
test_Tails_ISO_5501-plaintext-locale-greeter 35 24 Jun 2025, 17:01

Feature Report

Steps Scenarios Features
Feature Passed Failed Skipped Pending Undefined Total Passed Failed Total Duration Status
Installing Tails to a USB drive 50 3 22 0 0 75 7 3 10 36:55.569 Failed
Tags: @product
Feature Installing Tails to a USB drive
As a Tails user I want to install Tails to a suitable USB drive
Tags: @product @not_release_blocker
1:3.609
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails from DVD without network and logged in 28.524
And I temporarily create a 4 GiB disk named "gptfat" 0.464
And I create a gpt partition with a vfat filesystem on disk "gptfat" 13.987
And I plug USB drive "gptfat" 3.157
When I start Tails Installer 17.316
Then I am told by Tails Installer that the destination device "is too small" 0.159
After features/support/hooks.rb:330 1.800
After features/support/hooks.rb:100 0.006
Tags: @product
40.797
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.008
Given I have started Tails from DVD without network and logged in 20.693
And I temporarily create a 7200 MiB disk named "temp" 0.064
And I start Tails Installer 16.156
But a suitable USB device is not found 0.058
When I plug USB drive "temp" 3.526
Then the "temp" USB drive is selected 0.088
When I unplug USB drive "temp" 0.188
Then a suitable USB device is not found 0.021
After features/support/hooks.rb:330 5.070
After features/support/hooks.rb:100 0.002
Tags: @product
4:9.793
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.049
Given I have started Tails from DVD without network and logged in 14.261
And I temporarily create a 7200 MiB disk named "install" 0.065
And I create a gpt partition with a vfat filesystem on disk "install" 16.928
And I plug USB drive "install" 3.176
And I install Tails to USB drive "install" by cloning 2:37.115
Then the running Tails is installed on USB drive "install" 41.730
And there is a random seed on USB drive "install" 16.194
But there is no persistence partition on USB drive "install" 0.320
After features/support/hooks.rb:330 1.874
After features/support/hooks.rb:100 0.137
Tags: @product
4:49.951
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails from DVD without network and logged in 1:6.670
And I temporarily create a 7200 MiB disk named "install" 0.564
And I plug USB drive "install" 10.497
And I install Tails to USB drive "install" by cloning 2:40.195
Then the running Tails is installed on USB drive "install" 38.593
And there is a random seed on USB drive "install" 8.274
But there is no persistence partition on USB drive "install" 5.157
After features/support/hooks.rb:330 5.763
After features/support/hooks.rb:100 0.140
Tags: @product
13:11.639
Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13:11.639
try_for() 
try_for() timeout expired
Last ignored exception was: Dogtail::Failure: The Dogtail init script raised: SearchError: descendent of [application | Welcome to Tails!]: child with name="Your Persistent Storage is unlocked. Its content will be available until you shut down Tails." roleName='label'
STDOUT:

STDERR:


./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:339:in `initialize'
./features/support/helpers/dogtail.rb:268:in `new'
./features/support/helpers/dogtail.rb:268:in `call_tree_api_method'
./features/support/helpers/dogtail.rb:276:in `child'
./features/step_definitions/usb.rb:696:in `block (2 levels) in <top (required)>'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/usb.rb:694:in `block in <top (required)>'
./features/step_definitions/usb.rb:704:in `block in <top (required)>'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `block (2 levels) in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:694:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:704:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:45:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I create a file in the Persistent directory 0.000
And I temporarily create a 7200 MiB disk named "install" 0.000
And I create a gpt partition with a vfat filesystem on disk "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails with Persistent Storage to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is a persistence partition on USB drive "install" 0.000
And the USB drive "install" contains the same files as my persistent storage 0.000
After features/support/hooks.rb:330 11.623 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage' (at time 01:38:10)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_5501-plaintext-locale-greeter/35/artifact/build-artifacts/01:38:10_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_5501-plaintext-locale-greeter/35/artifact/build-artifacts/01:38:10_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_5501-plaintext-locale-greeter/35/artifact/build-artifacts/01:38:10_Installing_Tails_with_Tails_Installer_to_a_used_USB_drive,_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:100 0.024
Tags: @product
2:5.031
Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.010
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:5.031
try_for() 
try_for() timeout expired
Last ignored exception was: Dogtail::Failure: The Dogtail init script raised: SearchError: descendent of [application | Welcome to Tails!]: child with name="Your Persistent Storage is unlocked. Its content will be available until you shut down Tails." roleName='label'
STDOUT:

STDERR:


./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:339:in `initialize'
./features/support/helpers/dogtail.rb:268:in `new'
./features/support/helpers/dogtail.rb:268:in `call_tree_api_method'
./features/support/helpers/dogtail.rb:276:in `child'
./features/step_definitions/usb.rb:696:in `block (2 levels) in <top (required)>'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/usb.rb:694:in `block in <top (required)>'
./features/step_definitions/usb.rb:704:in `block in <top (required)>'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `block (2 levels) in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:694:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:704:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:57:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I temporarily create a 7200 MiB disk named "install" 0.000
And I plug USB drive "install" 0.000
And I install Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:330 14.781 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage' (at time 01:40:31)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_5501-plaintext-locale-greeter/35/artifact/build-artifacts/01:40:31_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_5501-plaintext-locale-greeter/35/artifact/build-artifacts/01:40:31_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_5501-plaintext-locale-greeter/35/artifact/build-artifacts/01:40:31_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive,_without_cloning_the_Persistent_Storage.journal
After features/support/hooks.rb:100 0.000
Tags: @product
2:3.783
Scenario Re-installing Tails over an existing USB installation with a persistent partition
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.004
Steps
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 2:3.783
try_for() 
try_for() timeout expired
Last ignored exception was: Dogtail::Failure: The Dogtail init script raised: SearchError: descendent of [application | Welcome to Tails!]: child with name="Your Persistent Storage is unlocked. Its content will be available until you shut down Tails." roleName='label'
STDOUT:

STDERR:


./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:339:in `initialize'
./features/support/helpers/dogtail.rb:268:in `new'
./features/support/helpers/dogtail.rb:268:in `call_tree_api_method'
./features/support/helpers/dogtail.rb:276:in `child'
./features/step_definitions/usb.rb:696:in `block (2 levels) in <top (required)>'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/usb.rb:694:in `block in <top (required)>'
./features/step_definitions/usb.rb:704:in `block in <top (required)>'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `block (2 levels) in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/usb.rb:694:in `/^persistence is successfully enabled$/'
./features/step_definitions/usb.rb:704:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:70:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I have started Tails from DVD without network and logged in 0.000
And I clone USB drive "__internal" to a temporary USB drive "install" 0.000
And I plug USB drive "install" 0.000
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:330 12.882 
SCENARIO FAILED: 'Re-installing Tails over an existing USB installation with a persistent partition' (at time 01:42:50)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_5501-plaintext-locale-greeter/35/artifact/build-artifacts/01:42:50_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_5501-plaintext-locale-greeter/35/artifact/build-artifacts/01:42:50_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_5501-plaintext-locale-greeter/35/artifact/build-artifacts/01:42:50_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.journal
After features/support/hooks.rb:100 0.000
Tags: @product @uefi
3:35.092
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.004
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 23.538
And I power off the computer 0.336
And the computer is set to boot in UEFI mode 0.057
When I start Tails from USB drive "__internal" with network unplugged and I login 3:0.357
Then Tails is running from USB drive "__internal" 2.440
And the boot device has safe access rights 8.300
And Tails has started in UEFI mode 0.063
After features/support/hooks.rb:330 0.684
After features/support/hooks.rb:100 0.006
Tags: @product
2:55.204
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Given I have started Tails from DVD without network and logged in 12.955
And I plug and mount a USB drive containing a Tails USB image 1:12.047
And I create a 7200 MiB disk named "usbimage" 0.059
And I plug USB drive "usbimage" 2.500
And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 1:27.641
After features/support/hooks.rb:330 4.386
After features/support/hooks.rb:100 0.118
Tags: @product
2:20.665
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Given a computer 0.177
And I start Tails from USB drive "usbimage" with network unplugged and I login 2:18.172
Then Tails is running from USB drive "usbimage" 0.937
And the label of the system partition on "usbimage" is "Tails" 0.641
And the system partition on "usbimage" is an EFI system partition 0.298
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.167
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.103
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.082
And the system partition on "usbimage" has the expected flags 0.083
After features/support/hooks.rb:330 0.670
After features/support/hooks.rb:100 0.006