And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.286
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.312
And
I accept adding "cowsay" to Additional Software
5.213
And
Additional Software is correctly configured for package "cowsay"
0.599
And
I shutdown Tails and wait for the computer to power off
3.859
And
I start Tails from USB drive "__internal" with network unplugged
34.380
And
I enable persistence
11.694
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
8.171
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.034
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.407
And
I can open the Additional Software configuration window from the notification
2.617
And
I shutdown Tails and wait for the computer to power off
7.582
And
I start Tails from USB drive "__internal" with network unplugged
33.922
And
I enable persistence
12.089
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.438
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052