And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.926
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.971
And
I accept adding "cowsay" to Additional Software
3.955
And
Additional Software is correctly configured for package "cowsay"
0.516
And
I shutdown Tails and wait for the computer to power off
3.883
And
I start Tails from USB drive "__internal" with network unplugged
35.392
And
I enable persistence
12.100
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
6.895
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.026
And
available upgrades have been checked
1.120
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.291
And
I can open the Additional Software configuration window from the notification
2.389
And
I shutdown Tails and wait for the computer to power off
14.260
And
I start Tails from USB drive "__internal" with network unplugged
32.740
And
I enable persistence
10.515
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.980
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.124
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.037
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053