And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.279
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.553
And
I accept adding "cowsay" to Additional Software
4.076
And
Additional Software is correctly configured for package "cowsay"
0.551
And
I shutdown Tails and wait for the computer to power off
4.016
And
I start Tails from USB drive "__internal" with network unplugged
33.831
And
I enable persistence
12.340
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
7.796
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.035
And
available upgrades have been checked
2.247
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.323
And
I can open the Additional Software configuration window from the notification
2.471
And
I shutdown Tails and wait for the computer to power off
12.705
And
I start Tails from USB drive "__internal" with network unplugged
33.937
And
I enable persistence
11.652
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.108
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.168
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.070
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054