And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.910
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.949
And
I accept adding "cowsay" to Additional Software
5.129
And
Additional Software is correctly configured for package "cowsay"
0.539
And
I shutdown Tails and wait for the computer to power off
3.968
And
I start Tails from USB drive "__internal" with network unplugged
35.204
And
I enable persistence
12.630
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
7.602
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.442
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.025
And
available upgrades have been checked
0.044
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.641
And
I can open the Additional Software configuration window from the notification
2.713
And
I shutdown Tails and wait for the computer to power off
18.042
And
I start Tails from USB drive "__internal" with network unplugged
34.347
And
I enable persistence
11.095
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.266
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.226
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071