And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.927
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.329
And
I accept adding "cowsay" to Additional Software
2.494
And
Additional Software is correctly configured for package "cowsay"
0.603
And
I shutdown Tails and wait for the computer to power off
2.589
And
I start Tails from USB drive "__internal" with network unplugged
34.631
And
I enable persistence
12.134
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
8.465
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.035
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.028
And
I can open the Additional Software configuration window from the notification
2.606
And
I shutdown Tails and wait for the computer to power off
18.098
And
I start Tails from USB drive "__internal" with network unplugged
33.971
And
I enable persistence
11.053
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.916
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.134
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060