And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.645
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.939
And
I accept adding "cowsay" to Additional Software
5.479
And
Additional Software is correctly configured for package "cowsay"
0.503
And
I shutdown Tails and wait for the computer to power off
4.086
And
I start Tails from USB drive "__internal" with network unplugged
33.066
And
I enable persistence
12.595
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.036
And
I log in to a new session
8.200
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.038
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.653
And
I can open the Additional Software configuration window from the notification
2.433
And
I shutdown Tails and wait for the computer to power off
12.614
And
I start Tails from USB drive "__internal" with network unplugged
32.412
And
I enable persistence
10.540
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.669
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.440
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.041