And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.802
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.122
And
I accept adding "cowsay" to Additional Software
4.858
And
Additional Software is correctly configured for package "cowsay"
0.570
And
I shutdown Tails and wait for the computer to power off
4.169
And
I start Tails from USB drive "__internal" with network unplugged
34.863
And
I enable persistence
11.498
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
7.648
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.029
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.992
And
I can open the Additional Software configuration window from the notification
2.398
And
I shutdown Tails and wait for the computer to power off
17.294
And
I start Tails from USB drive "__internal" with network unplugged
34.140
And
I enable persistence
11.008
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.003
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050