And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.303
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.573
And
I accept adding "cowsay" to Additional Software
5.457
And
Additional Software is correctly configured for package "cowsay"
1.143
And
I shutdown Tails and wait for the computer to power off
3.995
And
I start Tails from USB drive "__internal" with network unplugged
35.445
And
I enable persistence
12.701
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
7.210
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.039
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.865
And
I can open the Additional Software configuration window from the notification
2.432
And
I shutdown Tails and wait for the computer to power off
2.592
And
I start Tails from USB drive "__internal" with network unplugged
34.131
And
I enable persistence
11.315
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.245
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.035
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069