And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.440
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.690
And
I accept adding "cowsay" to Additional Software
4.294
And
Additional Software is correctly configured for package "cowsay"
0.542
And
I shutdown Tails and wait for the computer to power off
4.025
And
I start Tails from USB drive "__internal" with network unplugged
32.465
And
I enable persistence
9.840
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
6.473
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.030
And
available upgrades have been checked
0.034
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.855
And
I can open the Additional Software configuration window from the notification
2.381
And
I shutdown Tails and wait for the computer to power off
12.526
And
I start Tails from USB drive "__internal" with network unplugged
32.127
And
I enable persistence
10.571
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.468
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.037
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.047