And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.343
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.573
And
I accept adding "cowsay" to Additional Software
3.976
And
Additional Software is correctly configured for package "cowsay"
0.502
And
I shutdown Tails and wait for the computer to power off
3.846
And
I start Tails from USB drive "__internal" with network unplugged
32.663
And
I enable persistence
10.808
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.037
And
I log in to a new session
7.205
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.033
And
the network is plugged
0.039
And
available upgrades have been checked
0.045
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.492
And
I can open the Additional Software configuration window from the notification
2.368
And
I shutdown Tails and wait for the computer to power off
2:7.041
And
I start Tails from USB drive "__internal" with network unplugged
33.818
And
I enable persistence
11.097
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.423
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.140
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060