And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.645
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.260
And
I accept adding "cowsay" to Additional Software
4.166
And
Additional Software is correctly configured for package "cowsay"
0.475
And
I shutdown Tails and wait for the computer to power off
3.952
And
I start Tails from USB drive "__internal" with network unplugged
31.640
And
I enable persistence
10.381
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.031
And
I log in to a new session
6.625
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.029
And
available upgrades have been checked
1.080
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.859
And
I can open the Additional Software configuration window from the notification
2.566
And
I shutdown Tails and wait for the computer to power off
12.463
And
I start Tails from USB drive "__internal" with network unplugged
31.439
And
I enable persistence
10.378
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.182
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.135
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051