And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.018
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.013
And
I accept adding "cowsay" to Additional Software
5.264
And
Additional Software is correctly configured for package "cowsay"
0.526
And
I shutdown Tails and wait for the computer to power off
2.649
And
I start Tails from USB drive "__internal" with network unplugged
35.672
And
I enable persistence
12.698
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
7.905
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.030
And
available upgrades have been checked
1.119
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.375
And
I can open the Additional Software configuration window from the notification
2.639
And
I shutdown Tails and wait for the computer to power off
12.862
And
I start Tails from USB drive "__internal" with network unplugged
36.064
And
I enable persistence
12.178
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.894
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071