And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.974
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.287
And
I accept adding "cowsay" to Additional Software
4.837
And
Additional Software is correctly configured for package "cowsay"
0.619
And
I shutdown Tails and wait for the computer to power off
3.902
And
I start Tails from USB drive "__internal" with network unplugged
35.156
And
I enable persistence
12.246
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
7.913
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.278
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.092
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.033
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.374
And
I can open the Additional Software configuration window from the notification
2.409
And
I shutdown Tails and wait for the computer to power off
13.332
And
I start Tails from USB drive "__internal" with network unplugged
33.826
And
I enable persistence
12.307
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.887
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.147
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053