And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.129
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.066
And
I accept adding "cowsay" to Additional Software
3.987
And
Additional Software is correctly configured for package "cowsay"
0.493
And
I shutdown Tails and wait for the computer to power off
3.953
And
I start Tails from USB drive "__internal" with network unplugged
31.480
And
I enable persistence
10.346
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
7.067
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.034
And
available upgrades have been checked
0.037
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.895
And
I can open the Additional Software configuration window from the notification
2.466
And
I shutdown Tails and wait for the computer to power off
17.567
And
I start Tails from USB drive "__internal" with network unplugged
31.845
And
I enable persistence
10.387
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.265
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.126
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052