And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.279
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.164
And
I accept adding "cowsay" to Additional Software
4.955
And
Additional Software is correctly configured for package "cowsay"
0.643
And
I shutdown Tails and wait for the computer to power off
4.070
And
I start Tails from USB drive "__internal" with network unplugged
32.519
And
I enable persistence
10.718
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.222
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.025
And
available upgrades have been checked
0.041
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.428
And
I can open the Additional Software configuration window from the notification
2.392
And
I shutdown Tails and wait for the computer to power off
14.184
And
I start Tails from USB drive "__internal" with network unplugged
32.770
And
I enable persistence
11.041
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.926
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.375
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.044