And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.137
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.479
And
I accept adding "cowsay" to Additional Software
4.821
And
Additional Software is correctly configured for package "cowsay"
0.884
And
I shutdown Tails and wait for the computer to power off
3.993
And
I start Tails from USB drive "__internal" with network unplugged
32.937
And
I enable persistence
11.310
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
7.457
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.169
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.025
And
available upgrades have been checked
0.038
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.313
And
I can open the Additional Software configuration window from the notification
2.684
And
I shutdown Tails and wait for the computer to power off
13.828
And
I start Tails from USB drive "__internal" with network unplugged
34.118
And
I enable persistence
11.304
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.623
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.034
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057