And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.830
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.510
And
I accept adding "cowsay" to Additional Software
4.994
And
Additional Software is correctly configured for package "cowsay"
0.653
And
I shutdown Tails and wait for the computer to power off
4.190
And
I start Tails from USB drive "__internal" with network unplugged
36.048
And
I enable persistence
12.566
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
8.041
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.077
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.034
And
available upgrades have been checked
0.082
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.427
And
I can open the Additional Software configuration window from the notification
2.448
And
I shutdown Tails and wait for the computer to power off
18.529
And
I start Tails from USB drive "__internal" with network unplugged
34.643
And
I enable persistence
12.968
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.901
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077