And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.118
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.904
And
I accept adding "cowsay" to Additional Software
4.981
And
Additional Software is correctly configured for package "cowsay"
0.683
And
I shutdown Tails and wait for the computer to power off
3.940
And
I start Tails from USB drive "__internal" with network unplugged
33.302
And
I enable persistence
12.303
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
7.859
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.235
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.031
And
available upgrades have been checked
1.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.856
And
I can open the Additional Software configuration window from the notification
2.572
And
I shutdown Tails and wait for the computer to power off
12.941
And
I start Tails from USB drive "__internal" with network unplugged
33.846
And
I enable persistence
12.630
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
8.850
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.147
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054