And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.755
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.286
And
I accept adding "cowsay" to Additional Software
3.948
And
Additional Software is correctly configured for package "cowsay"
0.469
And
I shutdown Tails and wait for the computer to power off
2.544
And
I start Tails from USB drive "__internal" with network unplugged
32.115
And
I enable persistence
9.968
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
6.543
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.042
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.561
And
I can open the Additional Software configuration window from the notification
2.423
And
I shutdown Tails and wait for the computer to power off
12.406
And
I start Tails from USB drive "__internal" with network unplugged
32.474
And
I enable persistence
10.316
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.904
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049