And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.098
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.507
And
I accept adding "cowsay" to Additional Software
5.502
And
Additional Software is correctly configured for package "cowsay"
0.628
And
I shutdown Tails and wait for the computer to power off
3.827
And
I start Tails from USB drive "__internal" with network unplugged
33.476
And
I enable persistence
11.858
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
8.429
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.037
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.968
And
I can open the Additional Software configuration window from the notification
2.618
And
I shutdown Tails and wait for the computer to power off
12.838
And
I start Tails from USB drive "__internal" with network unplugged
33.959
And
I enable persistence
10.830
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.696
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.116
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087