And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.731
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.859
And
I accept adding "cowsay" to Additional Software
4.132
And
Additional Software is correctly configured for package "cowsay"
0.538
And
I shutdown Tails and wait for the computer to power off
3.819
And
I start Tails from USB drive "__internal" with network unplugged
33.411
And
I enable persistence
11.545
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
7.868
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.154
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.031
And
the network is plugged
0.040
And
available upgrades have been checked
0.076
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.877
And
I can open the Additional Software configuration window from the notification
2.553
And
I shutdown Tails and wait for the computer to power off
11.623
And
I start Tails from USB drive "__internal" with network unplugged
33.462
And
I enable persistence
10.841
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
7.266
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.151
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049