And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.730
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.302
And
I accept adding "cowsay" to Additional Software
4.941
And
Additional Software is correctly configured for package "cowsay"
0.670
And
I shutdown Tails and wait for the computer to power off
3.825
And
I start Tails from USB drive "__internal" with network unplugged
31.965
And
I enable persistence
10.586
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
7.373
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.189
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.025
And
available upgrades have been checked
1.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.871
And
I can open the Additional Software configuration window from the notification
2.497
And
I shutdown Tails and wait for the computer to power off
12.689
And
I start Tails from USB drive "__internal" with network unplugged
32.607
And
I enable persistence
11.079
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.055
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.078
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056