And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.429
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.562
And
I accept adding "cowsay" to Additional Software
3.874
And
Additional Software is correctly configured for package "cowsay"
0.437
And
I shutdown Tails and wait for the computer to power off
2.519
And
I start Tails from USB drive "__internal" with network unplugged
32.298
And
I enable persistence
10.785
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
7.181
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.147
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.029
And
available upgrades have been checked
2.148
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.457
And
I can open the Additional Software configuration window from the notification
2.385
And
I shutdown Tails and wait for the computer to power off
17.495
And
I start Tails from USB drive "__internal" with network unplugged
31.926
And
I enable persistence
9.940
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.630
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.395
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051