And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.046
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.588
And
I accept adding "cowsay" to Additional Software
4.981
And
Additional Software is correctly configured for package "cowsay"
0.521
And
I shutdown Tails and wait for the computer to power off
4.029
And
I start Tails from USB drive "__internal" with network unplugged
35.050
And
I enable persistence
11.810
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
7.885
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.436
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.028
And
available upgrades have been checked
0.033
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.369
And
I can open the Additional Software configuration window from the notification
2.423
And
I shutdown Tails and wait for the computer to power off
17.309
And
I start Tails from USB drive "__internal" with network unplugged
34.651
And
I enable persistence
11.549
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.264
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.256
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103