And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.880
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.645
And
I accept adding "cowsay" to Additional Software
2.307
And
Additional Software is correctly configured for package "cowsay"
0.771
And
I shutdown Tails and wait for the computer to power off
3.942
And
I start Tails from USB drive "__internal" with network unplugged
34.374
And
I enable persistence
11.905
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
8.967
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.439
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.034
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.359
And
I can open the Additional Software configuration window from the notification
2.633
And
I shutdown Tails and wait for the computer to power off
12.956
And
I start Tails from USB drive "__internal" with network unplugged
36.521
And
I enable persistence
12.290
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.333
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046