And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.296
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.923
And
I accept adding "cowsay" to Additional Software
3.709
And
Additional Software is correctly configured for package "cowsay"
0.761
And
I shutdown Tails and wait for the computer to power off
4.061
And
I start Tails from USB drive "__internal" with network unplugged
36.516
And
I enable persistence
9.667
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
8.237
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.016
And
available upgrades have been checked
2.137
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.978
And
I can open the Additional Software configuration window from the notification
2.523
And
I shutdown Tails and wait for the computer to power off
18.381
And
I start Tails from USB drive "__internal" with network unplugged
36.262
And
I enable persistence
9.319
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.388
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078