And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.304
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.647
And
I accept adding "cowsay" to Additional Software
4.836
And
Additional Software is correctly configured for package "cowsay"
0.792
And
I shutdown Tails and wait for the computer to power off
4.438
And
I start Tails from USB drive "__internal" with network unplugged
39.750
And
I enable persistence
10.805
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
11.124
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.496
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.019
And
available upgrades have been checked
2.216
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.504
And
I can open the Additional Software configuration window from the notification
2.521
And
I shutdown Tails and wait for the computer to power off
19.558
And
I start Tails from USB drive "__internal" with network unplugged
40.737
And
I enable persistence
10.019
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.973
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.081
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056