And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.662
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.568
And
I accept adding "cowsay" to Additional Software
5.081
And
Additional Software is correctly configured for package "cowsay"
0.927
And
I shutdown Tails and wait for the computer to power off
4.236
And
I start Tails from USB drive "__internal" with network unplugged
37.170
And
I enable persistence
6.766
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
9.859
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.596
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.014
And
available upgrades have been checked
2.162
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.500
And
I can open the Additional Software configuration window from the notification
2.543
And
I shutdown Tails and wait for the computer to power off
22.569
And
I start Tails from USB drive "__internal" with network unplugged
38.555
And
I enable persistence
6.829
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
11.322
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057