And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.690
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.669
And
I accept adding "cowsay" to Additional Software
4.845
And
Additional Software is correctly configured for package "cowsay"
0.704
And
I shutdown Tails and wait for the computer to power off
8.201
And
I start Tails from USB drive "__internal" with network unplugged
37.464
And
I enable persistence
6.808
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
10.261
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.021
And
available upgrades have been checked
1.097
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.549
And
I can open the Additional Software configuration window from the notification
2.544
And
I shutdown Tails and wait for the computer to power off
13.941
And
I start Tails from USB drive "__internal" with network unplugged
37.340
And
I enable persistence
6.224
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.559
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064