And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:30.187
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.646
And
I accept adding "cowsay" to Additional Software
4.851
And
Additional Software is correctly configured for package "cowsay"
0.631
And
I shutdown Tails and wait for the computer to power off
8.494
And
I start Tails from USB drive "__internal" with network unplugged
38.545
And
I enable persistence
10.598
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
10.410
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.016
And
available upgrades have been checked
2.196
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.595
And
I can open the Additional Software configuration window from the notification
2.557
And
I shutdown Tails and wait for the computer to power off
12.659
And
I start Tails from USB drive "__internal" with network unplugged
37.776
And
I enable persistence
10.778
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
11.064
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.271
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082