And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.065
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.308
And
I accept adding "cowsay" to Additional Software
3.656
And
Additional Software is correctly configured for package "cowsay"
0.580
And
I shutdown Tails and wait for the computer to power off
6.952
And
I start Tails from USB drive "__internal" with network unplugged
36.413
And
I enable persistence
8.990
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
9.794
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.033
And
available upgrades have been checked
1.094
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.464
And
I can open the Additional Software configuration window from the notification
2.510
And
I shutdown Tails and wait for the computer to power off
17.680
And
I start Tails from USB drive "__internal" with network unplugged
36.234
And
I enable persistence
10.019
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
10.370
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064