And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.714
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.899
And
I accept adding "cowsay" to Additional Software
3.878
And
Additional Software is correctly configured for package "cowsay"
0.473
And
I shutdown Tails and wait for the computer to power off
2.543
And
I start Tails from USB drive "__internal" with network unplugged
31.851
And
I enable persistence
10.389
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.043
And
I log in to a new session
7.736
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.034
And
available upgrades have been checked
0.037
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.315
And
I can open the Additional Software configuration window from the notification
2.375
And
I shutdown Tails and wait for the computer to power off
12.426
And
I start Tails from USB drive "__internal" with network unplugged
32.292
And
I enable persistence
10.502
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.724
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.040
Then
the Additional Software upgrade service has started
0.038
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068