And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.047
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.408
And
I accept adding "cowsay" to Additional Software
4.777
And
Additional Software is correctly configured for package "cowsay"
0.511
And
I shutdown Tails and wait for the computer to power off
4.140
And
I start Tails from USB drive "__internal" with network unplugged
32.877
And
I enable persistence
11.811
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
8.042
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.512
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.023
And
available upgrades have been checked
0.044
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.668
And
I can open the Additional Software configuration window from the notification
2.404
And
I shutdown Tails and wait for the computer to power off
17.956
And
I start Tails from USB drive "__internal" with network unplugged
33.713
And
I enable persistence
12.076
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.527
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.132
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064