And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.736
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.868
And
I accept adding "cowsay" to Additional Software
5.031
And
Additional Software is correctly configured for package "cowsay"
0.604
And
I shutdown Tails and wait for the computer to power off
3.917
And
I start Tails from USB drive "__internal" with network unplugged
36.267
And
I enable persistence
13.859
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
8.095
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.262
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.032
And
available upgrades have been checked
1.083
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.340
And
I can open the Additional Software configuration window from the notification
2.678
And
I shutdown Tails and wait for the computer to power off
12.893
And
I start Tails from USB drive "__internal" with network unplugged
35.011
And
I enable persistence
11.805
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.099
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074