And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.384
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.583
And
I accept adding "cowsay" to Additional Software
4.895
And
Additional Software is correctly configured for package "cowsay"
0.618
And
I shutdown Tails and wait for the computer to power off
4.092
And
I start Tails from USB drive "__internal" with network unplugged
34.322
And
I enable persistence
11.298
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
7.588
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.040
And
available upgrades have been checked
0.044
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.833
And
I can open the Additional Software configuration window from the notification
2.650
And
I shutdown Tails and wait for the computer to power off
12.775
And
I start Tails from USB drive "__internal" with network unplugged
33.084
And
I enable persistence
12.127
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.019
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049