And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.288
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.783
And
I accept adding "cowsay" to Additional Software
3.901
And
Additional Software is correctly configured for package "cowsay"
0.546
And
I shutdown Tails and wait for the computer to power off
3.993
And
I start Tails from USB drive "__internal" with network unplugged
32.480
And
I enable persistence
10.819
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
6.515
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.158
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.033
And
available upgrades have been checked
1.078
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.769
And
I can open the Additional Software configuration window from the notification
2.563
And
I shutdown Tails and wait for the computer to power off
17.474
And
I start Tails from USB drive "__internal" with network unplugged
31.223
And
I enable persistence
10.021
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
6.799
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.151
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.082
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062