And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.818
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.886
And
I accept adding "cowsay" to Additional Software
4.784
And
Additional Software is correctly configured for package "cowsay"
0.485
And
I shutdown Tails and wait for the computer to power off
4.249
And
I start Tails from USB drive "__internal" with network unplugged
33.844
And
I enable persistence
11.836
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
7.077
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.111
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.814
And
I can open the Additional Software configuration window from the notification
2.523
And
I shutdown Tails and wait for the computer to power off
12.827
And
I start Tails from USB drive "__internal" with network unplugged
33.594
And
I enable persistence
11.232
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.314
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.042