And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.103
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
4.945
And
I accept adding "cowsay" to Additional Software
5.454
And
Additional Software is correctly configured for package "cowsay"
0.485
And
I shutdown Tails and wait for the computer to power off
3.983
And
I start Tails from USB drive "__internal" with network unplugged
33.238
And
I enable persistence
11.256
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.390
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.037
And
available upgrades have been checked
1.109
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.801
And
I can open the Additional Software configuration window from the notification
2.627
And
I shutdown Tails and wait for the computer to power off
12.593
And
I start Tails from USB drive "__internal" with network unplugged
33.689
And
I enable persistence
10.941
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.291
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.044
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045