And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.914
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.498
And
I accept adding "cowsay" to Additional Software
4.976
And
Additional Software is correctly configured for package "cowsay"
0.646
And
I shutdown Tails and wait for the computer to power off
3.990
And
I start Tails from USB drive "__internal" with network unplugged
35.960
And
I enable persistence
12.995
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
8.186
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.037
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.011
And
I can open the Additional Software configuration window from the notification
2.458
And
I shutdown Tails and wait for the computer to power off
12.995
And
I start Tails from USB drive "__internal" with network unplugged
34.820
And
I enable persistence
11.547
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
8.917
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.094
And
the network is plugged
0.094
Then
the Additional Software upgrade service has started
0.069
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087